4
T250
Status
Pro
–
T250 Instruction manual
SAFETY INSTRUCTIONS
1.2 Standards
All Status Pro Laser and Receiver Instruments are developed and manufactured
according to the following CE Standards:
•
EN 55 011
•
EN 55 022
•
EN 61 000-4-2
•
EN 61 000-4-3
•
EN 60 335
1.3 Instrument care
Your measurement instrument is designed for use in an industrial environmentand can
withstand water splashes or light spray as well as dust. Clean the equipment using a soft
cotton cloth and a mild soap solution. Laser apertures as well as well as sensor areas
should only be cleaned using a soft, dry and dust-free cloth. Do not use paper towels to
clean glass surfaces as they could scratch. Avoid contact with grease, oil or oil-based
solutions when handling the equipment..
1.4 Maintenance
The mechanical components of your equipment are prone to natural wear and tear! If the
Instrument appears to have a technical defect, contact the Manufacturer. Das Gerät nicht
eigenständig öffnen. Attempted repairs through unauthorised personnel makes the gua-
rantee null and void!
Always store the equipment under dry conditions and use the case for transportation.
Note
To be able to identify the equipment when seeking advice always
quote the serial number of the equipment. The Manufacturer does
not accept any responsibility for damage incurred through incorrect
maintenance carried out by non-authorised personnel.
