42
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
22.
Using the
4 mm Hex Key
, tighten the two
Flat Head Hex
Screws
, being careful not to over-tighten.
Installing the Grab Handle
Mounting the Monitors
1.
Place the
Monitor
screen side down on a flat, clean surface.
2.
(Optional) Remove any
Screws
or
Place Holders
from the
VESA Mounting Holes
on the back of the
Monitor
.
Note:
Be careful not to remove any of the
Screws
holding
the
Monitor’s
Casing
together.
3.
Align the
Screw Holes
on the
VESA Mount
with the
VESA
Mounting Holes
on the back of the
Monitor
. The
VESA
Mount
can support 75 x 75 or 100 x 100 mounting pattern.
Note:
When attached, the
Notch
on the
VESA Mount
should be along the bottom edge of the
Monitors
.
