Handbook for the TRIUS PRO-825C Issue 1 September 2020
3
‘Quick Starting’ your TRIUS PRO-825C system
Please note, the TRIUS PRO-825C is the successor to the TRIUS SX-9C. The drivers
and file formats are identical so within our software and other third party
software, your PRO-825C camera will be identified as an H9C or SX-9C derivative.
In the shipping container you will find the following items:
1)
The TRIUS PRO-825C camera head.
2)
A universal AC power supply module.
3)
A USB camera cable.
4)
An adaptor for 1.25” drawtubes, with a 1.25” filter thread.
5)
An adaptor for 2” drawtubes and M42 Pentax thread lenses.
6)
A guider output to guider port RJ12 lead.
7)
Two Mini to Mini USB 0.5m USB Cables
8)
Two Mini to Male B USB 0.5m USB Cables
9)
A 'Y' power lead for connecting the cooling fan.
10)
A USB stick with the TRIUS Colour Camera Control Software and the PRO 825C
manual.
You will also need a PC computer with Windows XP, Vista or Windows 7 installed.
This machine must have at least one USB 2.0 port available and at least 256 Mbytes
of memory. If you intend to view the finished images on its screen, then you will also
need a graphics card capable of displaying an image with a minimum of 1024 x 768
pixels and 24 bit colour. A medium specification Pentium with between 1GHz and
4GHz processor speed is ideal, but I recommend avoiding some of the lower
specification ‘Netbook’ computers, as they can’t really handle the fast data stream
from the camera. Please note that USB 2.0 operates at a very high speed and cannot
operate over very long cables. Five metres of good quality cable is the maximum
normally possible without boosters or extra powered hubs, although you can
sometimes get good results at longer distances with very high quality cables.
