Handbook for the TRIUS PRO-825C Issue 1 September 2020
6
Now connect up the power supply and switch it on. The supply is a very efficient
‘switch mode’ unit, which can operate from either 110v or 220v AC via an
appropriate mains power cable (supplied). You can now start the software by double
clicking on the icon, when you should see the main menu and image panel appear. If
this is the first time that it has been run, you will receive a warning about the lack of
an ‘ini’ file – just click on ‘OK’ and then open ‘Set program defaults’ from the ‘File’
menu. In the bottom right hand corner of this box, select SXV-H9C. Now click on
‘Save’ and the ini file will be created and the software set for your camera.
Now click on the camera icon at the top of the screen. If the USB connection is OK, a
message box will inform you of the ‘Handle’ number for the SXVIO interface and
various other version details etc. Click ‘OK’ and the main camera control panel will
now be seen.
