16
•
Front Springs: Check for loose hardware, cracks at attachments
•
Front Wheel Alignment: Check for unusual tire wear, align if required
•
Parking Brake: Check for bent/binding linkage rod, check for damage or
wear to latch arm or catch bracket, lubricate as required, use light oil. Do
not lubricate cables or brake latch.
•
Rear Shock Absorbers: Check for oil leakage, loose mounting hardware
•
Charger Plug: Clean auxiliary contact (see Battery Charger Maintenance)
•
Hardware and Fasteners: Check for loose or missing hardware and compo-
nents, tighten or replace missing hardware
Semi-Annually
•
Direction Selector: Check for wear and smooth movement (lubricate shaft
with light oil if required)
•
King Pins: Check for excessive play and tightness of retaining nuts
•
Steering Assembly: Check bellows and pinion seal for damage or grease
leakage
•
Rack End Ball Joint: Lubricate, use wheel bearing grease
•
Rear Axle: Check for unusual noise and loose or missing mounting hard-
ware
Annually
•
Front Wheel Bearings: Check and adjust as required, see Technician’s Re-
pair and Service Manual
•
Rear Axle: Check lubricant, add lubricant level as required
•
Service Brakes: Clean and adjust, check brake shoe linings
Tire Inspection:
Tire condition should be inspected per the Periodic Service Sched-
ule. Inflation pressures should be checked when the tires are cool. Be sure to install
the valve dust cap after checking or inflating.
Periodic Test for Mechanical Brake
WARNING:
To reduce the possibility of severe injury or death, always evaluate ped-
al travel before operating a vehicle to verify some braking function is present. All
driving brake tests must be done in a safe location with regard for the safety of all
personnel.
NOTE:
Over time, a subtle loss of performance may take place. Therefore, it is im-
portant to establish the standard with a new vehicle.
Содержание BN72-08-AC-Autodrive-M
Страница 34: ...34 6 Electrical Diagrams...
Страница 35: ...35...
