background image

12

3: Operation and Service Information

Before Initial Use

Read, understand and follow the safety label on the instrument panel. Be sure you 
understand how to operate the vehicle, its equipment and how to use it safely. 
Maintaining good performance depends to a large extent on the operator.

Vehicle batteries must be fully charged before initial use. Check for correct tire in-
flation. See Vehicle Specifications. Determine and record braking distance required 
to stop vehicle for future brake performance tests.

Remove the protective clear plastic that protect the seat bottom and back rest 
during shipping, before placing the vehicle in service.

WARNING:

 To prevent overheating that may cause serious damage to the charger 

and create the potential for fire, do not block or obstruct the airways. Portable 
chargers must be mounted on a platform above the ground or in such a manner as 
to permit the maximum airflow underneath and around the charger.

Portable chargers are shipped with the vehicle. Prior to vehicle or charger oper-
ation, chargers must be removed and mounted on a platform or wall above the 
ground to permit maximum airflow around and underneath the charger. If the char-
ger is operated in an outdoor location, rain and sun protection must be provided.

Controls

Содержание BN72-08-AC-Autodrive-M





































Отзывы: