Stardom Sohoraid SR5 Series, Руководство пользователя

Страница: 16 / 21

5.4.4 Check Volume Set
Use this function to check the consistency of the volume set.
5.4.5 Stop Volume Set Check
Stop the volume set consistency check currently in progress.
5.5 Physical Drive
This function shows all of the physical drive related information including:
• Create Pass Through Disk • Modify Pass Through Disk • Delete Pass Through Disk
• Identify the Device
5.5.1 Create Pass Through Disk
This HDD will not be added to the RAID set and will be treated as an independent disk drive by the operating
system. Once this HDD has been set up, the hardware information will be shown.
5.5.2 Modify Pass Through Disk
This function can be used to modify the settings for the current Pass Through Disk. Once modified the hard-
ware information will be shown.
5.5.3 Delete Pass Through Disk
This function can be used to delete the currently defined Pass Through Disk.
5.5.4 Identify Device
To avoid the removal of the wrong HDD, this function can be used to check that the correct HDD is currently
selected. Select this function then select the HDD to remove. The LED light for the selected HDD will begin
to blink.
5.6 System Controls
The RAID System functions offer the following setup options:
• System Config • EtherNet Config • Alert By Mail Config
• SNMP Configuration • NTP Configuration • View Events/Mute Beeper
• Generate Test Event • Clear Event Buffer • Modify Password
• Upgrade Firmware • Restart Controller
5.6.1 System Config
Click this feature will enter to advanced access device-related settings.
5.6.2 EtherNet Config
This function can be used to configure the Ethernet settings, including: DHCP Function, Local IP Address,
HTTP Port Number, Telnet Port #, SMTP Port Number and Ethernet Address.
5.6.3 Alert By Mail Config
Click this function to set alert by mail.
5.6.4 SNMP Configuration
This function can be used to set the related web management.
5.6.5 NTP Configuration
You can set system time by NTP configuration
5.6.6 View Events/Mute Beeper
It shows all RAID system events and mute beeper.
SOHORAID SR5 Series User Manual
14