Stardom Sohoraid SR5 Series, Руководство пользователя

Страница: 13 / 21

5.2 Quick Setup
The “Quick Volume and RAID Set Setup” function is the fastest way to complete the system setup process
and involves just five steps. The LCD instructions are provided below:
(1) Log into the system via the LCD then select the “Quick Volume and RAID Set Setup” function. The
system will automatically detect the number of hard disk drives (HDD) installed and display the avail-
able RAID levels.
(2) Use the Up and Down buttons to select the RAID level you wish to use. Press the “ENTER” button to
confirm your selection when done.
(3) The system will show the available storage capacity corresponding to the selected RAID level. You
can change the storage capacity using the Up and Down buttons. Press the “ENTER” button to con-
firm your settings when done.
(4) Select the Stripe Size. Press the “ENTER” button to confirm your selection when done.
(5) Press the “ENTER” button to confirm the settings, or the “ESC” button to cancel.
(6) Once the ENTER button is pressed the system will complete the setup process.
Note :
1. All physical drives will be included in the RAID set. The RAID capacity will be calculated using the ac-
tual capacity of the smallest hard drive.
2. This function will create only one volume. If you need to add additional volumes, please select the
“Volume Set Functions” to make your changes.
5.3 RAID Setup
The “RAID Set Functions” allow you setup your RAID. The setup functions include:
• Create RAID Set • Delete RAID Set • Expand RAID Set
• Offline RAID Set • Activate RAID Set • Create Hot Spare
• Delete Hot Spare • Rescue RAID Set
5.3.1 Create RAID Set
After selecting this function the system will first ask you to choose the number of HDD to setup. You can use
the Up, Down and “ENTER” buttons to make your selection. When done, press the “ENTER” button to con-
firm your selection. Please refer to the above chart for more details.
Note : This function only carries out the initial setup. You must go back to the “Volume Set Func-
tions” to setup the volumes before the RAID set can be used normally.
5.3.2 Delete RAID Set
This function can be used to delete previously created RAID sets so you can setup new RAID sets.
SOHORAID SR5 Series User Manual
11