Fig.1
Fig.2
Fig.3
Fig.4
CAUTION
CAUTION
CAUTION
Handpiece Tubing
Connector
Nut
Handpiece Tubing
Motor Cord Connector
Motor Cord
Nut
AC Adapter Plug
AC Adapter Connector
3. Operating Control Box
· Only use 4/5 hole or 6 pin tubing.
· Do not use wet or contaminated air.
· Install an air filter if necessary. Blow out the lines before
installation.
(1) Connect the handpiece tubing from the delivery unit to the control box
Fit the handpiece tubing connector from the delivery unit to the
control box handpiece tubing connector and tighten. (Fig. 1)
(2) Connecting the Motor
Insert the Motor Cord Connector to the control box motor cord
connector and tighten. (Fig. 2)
(3) Connecting the AC adapter
Insert the AC adapter plug into the AC adapter connector before
plugging into wall outlet. (Fig. 3)
Never use the AC Adapter for anything other than the Control
Box of this product.
(4) Connecting the Power Cord
Insert the Power Cord into the Inlet of AC Adapter. (Fig. 4)
Plug cord into AC outlet.
· Be sure that there is no air or water coming from Handpiece Tubing when attaching to control box.
· Do not overtighten the handpiece tubing and motor cord nuts.
4
Motor Cord Connector
Handpiece Tubing
Connector
Nut
Handpiece Tubing
Motor Cord
Nut
AC Adapter Plug
AC Adapter Connector
Inlet
Power Cord
Inlet
Power Cord
AC Adapter
AC Adapter
