4) Press the foot pedal of the delivery system, and hold the air pressure between "
" - " ". Press
key
until it beeps (more than 3 seconds) to memorize the upper limit of the air pressure.
NOTICE
· Default value is set to "
" (kgf/cm
2
) = 0.3MPa = 42.67psi.
· When the air pressure is not between "
" - " ", " " is displayed, and the setting will not be memorized.
5) Press both
key and key at the same time until it beeps (more than 3 seconds).
When it beeps, the setting is complete. Set Speed Indicator by pressing key to " ".
The NuTorque
®
Lite is now ready to use at the maximum speed, 40,000 min
-1
(rpm).
(2) Light Brightness Adjusting Function
1) Press
key and key at the same time until you hear a beep (more than 3 seconds).
2) When beep sounds, Indicator will change to "
". Press the key to change the Indicator to C3
(
) - Light Brightness adjustment mode. Press key to proceed to change to desired brightness.
3) Indicator will chang to " "(Default value), press key and adjust the brightness.
NOTICE
· Default value is set to " " Volt.
· Adjustable between " " - " ".
4) Press
key until it beeps (more than 3 seconds) to set the brightness.
5) Press
key and key at the same time for more than 3 seconds, once again. When it beeps,
this setting is complete.
(3) Program Function
It is possible to program two (2) presets (Speed, Gear Ratio, Forward/Reverse Direction)
Once set, you can choose between presets by pressing the or the
key.
To set the values for Speed, Gear Ratio, Forward/Reverse Direction press key or
key until it beeps (more than
3 seconds). When it beeps, this setting is complete.
NOTICE
· The displayed air pressure is only a guideline. Measure the correct air pressure with an air gage.
· The unit of displayed air pressure is "kgf/cm
2
". For other unit, refer to the NOTICE described in 4).
NOTICE
· Default value is set " " (kgf/cm
2
) = 0.05MPa = 7.11psi.
· When the air pressure is not between "
" - " ", " " is displayed, and the setting will not be memorized
B. Setting Upper Limit:
1) After setting lower limit, press key. Speed Indicator will change to "
" (Upper air pressure limit
setting mode).
2) Press the key, the Speed Indicator will flash "
" and " ".
3) Press the Foot Pedal of the delivery system, the Speed Indicator displays the current air pressure. (Unit is kgf/cm
2
)
7