Starbridge Networks LYNX L-220, Руководство пользователя

Страница: 51 / 64

51
5.4.5.2
Static Route
If your LAN consists of multiple subnets and you want to manually define the
data transmitting paths, Static Route is to be used.
To create a new Static Route, click Add. The Routing-Static Route Add
page will shows up.
The key settings for adding a new Static Route are explained:
Destination Network Address:
Enter the network address to which the data packets are to be sent.
Subnet Mask:
Enter the subnet mask for this destination.
Use Gateway IP Address:
If you wish to use a specific gateway to reach the destination network, select
this checkbox and then enter the IP address of the gateway.
NOTE: If you want to select Enable Assigned Default Gateway , you will
have to reboot the Lynx L-220.