Starbridge Networks LYNX L-220, Руководство пользователя

Страница: 48 / 64

48
To create a new incoming IP filter, click Add. The Add IP Filter-Incoming
page will be displayed.
Key in the following parameters:
Filter Name:
Key in the name of the filter rule.
Protocol:
Select the IP protocol to allow.
Source IP Address/Subnet Mask:
Enter the IP address of the remote server from which to allow connection.
Source Port:
Enter the port number used by the application to allow.
Destination IP Address/Subnet Mask:
Enter the IP address of the PC on the LAN to which connection is allowed.
Destination Port:
Enter the destination port number used by the application to allow.
Click Save/Apply to take effect the settings. The new rule will then be
displayed in the Incoming IP Filtering table list.