3
CAUTION
This equipment is designed and sold for commercial
use only by personnel trained and experienced in its
operation and is not sold for consumer use in and
around the home nor for use directly by the general
public in food service locations.
INSTALLATION
For your protection, we recommend that a qualified
electrician install this appliance. The electrician should
be familiar with electrical installations and your local
electrical requirements. Proper connections and
power supply are essential for efficient performance.
The supply circuit should be properly fused as required
by electrical code. Plug the unit into a proper A.C.
voltage wall outlet only. A three-prong plug is provided
with the unit. If an adapter is used be sure a good
ground is provided.
LOAD
The rated load is on the nameplate. The line in the wall
outlet must be heavy enough to carry this load, or the
waffle baker will be slow in performance.
CAUTION
DO NOT CONNECT TO DIRECT CURRENT
(DC).
TEFLON
®
COATED WAFFLE BAKERS
CAUTION
DO NOT USE METAL UTENSILS TO REMOVE
WAFFLE FROM THE TEFLON
®
COATED
WAFFLE BAKER. THIS WILL VOID THE
WARRANTY.
CAUTION
DO NOT CLEAN TEFLON
®
GRIDS WITH
ABRASIVES. THIS WILL VOID THE
WARRANTY.
CORD, PLUG AND GROUND INSTRUCTIONS
For your protection, this appliance is equipped with a
3-conductor load cord, having a grounding type plug.
It should only be used with a properly grounded 3-
prong receptacle. Do not modify. If you use an adapter
be sure your system is grounded. Connect the green
wire to a mounting screw of the receptacle. For
ungrounded electrical systems, connect the green
wire of the adapter to a known permanent ground.
RELEASE AGENT CAUTION
If you find it necessary to use a release agent to keep
waffles from sticking, you should brush it on. Spraying
may oversaturate the grids and the excess has the
possibility of building up inside the baker and causing
damage. If you only have a spray type release agent, try
spraying it into a container and using the contents with
a pastry brush.
SEASONING WAFFLE GRIDS
(Not applicable to Teflon
®
coated grids)
With a pastry brush, apply vegetable oil, butter, or grid
release agent on both grids. Turn power on and allow
to preheat for twenty minutes. Lift the lid and re-apply
vegetable oil, butter, or grid release agent. Allow the
unit to heat for five more minutes. The baker is now
ready for use.
CAUTION
GRIDS AND CUPS HAVE VERY HIGH
TEMPERATURES. DO NOT COME IN DIRECT
CONTACT WITH THESE PARTS WHEN THE
WAFFLE BAKER IS IN OPERATION. DO NOT
ALLOW CORD TO COME INTO CONTACT
WITH HOT GRIDS.
