Star Trac 8-Series, Руководство пользователя

Страница: 23 / 26

21
• Select
Remove TV Config Files
from the
TV Setup
screen.
•
At the prompt, press OK to proceed and remove
the configuration files or
Cancel
to return to TV
Setup screen.
• Select
Manual Channel Config
from the
TV Setup
screen.
•
At the prompt, press OK to proceed to manual
configuration or Cancel to return to TV Setup screen
•
Connect the USB thumb drive, that contain the TV
setup files, to the USB port on the center console.
• Wait until the USB source is recognize by the system
(USB icon will appear on the screen).
•
Navigate to the TV Setup screen and select
Import TV Config
, (You will be prompted that the files
successfully imported.) TV config import is now
complete.
•
In Manual Channel Config screen, select the Norm
(NTSC, PAL, etc…)
•
Tap on the frequency column of each channel and key
in the desired frequency for that channel.
• Press
Save and Exit
to return to
TV Setup
screen.
•
Press Cancel to return to TV Setup screen without
saving changes.
•
Tap on a channel under Current Number to preview that
channel.
•
Tap on an item under Desired Number to bring up a
numeric keypad; key in the desired channel number and
press OK. This changes the current channel number to
your new selection.
•
Under Yes/No, select Yes to make a specific channel avail
able for viewing or select No to hide that channel.
• Use the
Analog Audio Gain
slider bar to adjust audio gain
for analog channels, then press
Apply Gain
to save setting.
•
Use the Digital Audio Gain slider to adjust audio gain for
digital channels, press Apply Gain to save setting.
3. Remove TV Config Files: allows you to clear all TV
settings in the event the TV configuration becomes
corrupted.
4. Manual Channel Configuration:
Allows you to
manually configure the frequency of each channel:
Note: once TV configuration files have been removed all
channel settings will be cleared and a channel scan must be
performed.
Note: Manual configuration will clear all settings of previously
scanned channels. Also, Manual Channel configuration only
works for analog TV.
5. Import TV Config: Allows you to import all TV
settings and channel scan information from a USB
thumb drive to your display: