Star Trac 8-Series, Руководство пользователя

Страница: 22 / 26

20
TOUCHSCREEN CALIBRATION
This menu lets you calibrate your Touch Screen. The
touch screen is calibrated before it leaves the factory. If
for any reason you need to recalibrate the unit, follow
these steps:
1. Channel Scan: Scans the TV signal:
TV SETUP
Allows you to setup and manage your TV functionality.
While in this screen, the following options can be
modified:
1. Press the Touchscreen Cal icon. A message would
appear indicating the Touchscreen files have been
deleted.
2. Cycle the equipment power.
3. Once the system powers up, you will be prompted to
touch 3 points on the touch screen.
4. Do Not touch the screen until prompted.
5. Touch the screen at the points marked by the
crosshair.
6. After touching the 3 indicated points, the Touch
Screen will be calibrated.
•
Select Channel Scan on the TV Setup screen.
• Select the signal type from the
Scan Mode
option
(Both, Analog or Digital).
•
Select the Norm (NTSC, PAL, etc…)
•
Select Cable Standard (depends on the country of
installation).
• Press Start to begin the scan.
•
After the channel scan is completed. Press Exit , the
Calibration and Setup screen appears.
• Press
Cancel
to exit and go back to
Home Screen
.
•
The channel scan has been completed.
1. Channel Scan.
2. Channel Maintenance.
3. Remote TV Config Files.
4. Manual Channel Config.
5. Import TV Config.
6. Export TV Config.
2. Channel Maintenance: allows you to Hide channels,
re-number channels and adjust Audio gain levels.
Select Channel Maintenance from the TV Setup screen: