Star Trac 8-Series, Руководство пользователя

Страница: 18 / 26

PRODUCT MODEL SETUP
16
INSTALLATION
Refer to the Installation manual for the base unit
product for details on mounting and connecting
the display.
SETUP
After powering the unit for the first time, the computer
will boot up and the Maintenance Mode screen will
appear in the display. If for any reason the Maintenance
Mode Screen does not appear, press and hold “ VOL +,
CH/TRK + , and 3 ” simultaneously.
To complete the setup, follow this steps:
SERVICE MENU
To access Service Menu options:
1. Enter the Managers Password (218) to gain access to
the Product Selection screen.
2. Select the Product you are setting up
3. Once a model is selected, the Maintenance Mode
screen will appear.
4. Verify that the serial number matches the last 5 digits
of the Display Serial number. If the numbers do not
match, retype the number (the serial number is
printed outside the package of your Embedded
Display). Click inside the Serial Number tab and the
Numeric Keypad will popup.
5. Verify that the displayed model in the MODEL tab
matches the previously selected product.
6. Modify any customizable parameters from the
default values to meet your needs.
7. Press SAVE AND EXIT . The unit will take you to the
Home Screen (screen will vary depending on model).
8. Calibration: Treadmills require you perform a Speed
Calibration and Incline Calibration
(see Calibration and Setup section)
1. While in Home Screen , press “ VOL +, CH/TRK + , and
3
” simultaneously.
2. Service Menu will now be displayed.
3. Select a sub-menu from the list (i.e. Maintenance
Mode), a pop up window appears requesting
a Password.
9. Perform a Channel Scan (see Calibration and
Setup section)
4. Enter password 218 to gain access to the sub-menu
(i.e. Maintenance Mode).