Star-Oddi Starmon Mini Скачать руководство пользователя

Страница: 14 / 92

User Manual

SeaStar Graphic Supporting Software

Page 14

If you have selected to use the Connection Wizard, the following window appears:

Figure 4.4 Recorder Wizard

SeaStar checks which version of firmware is in the recorder. If the software does not

recognize the firmware the user will be asked to update SeaStar as there might be a

new functionality in the firmware which SeaStar does not support.

Connection time registration

Each time SeaStar connects to a Recorder, the PC time and recorder time is

registered to a binary file, with a CLK extension. This information is also saved to a text

file with the extension CCT.

Another text file is created with the extension CCD, containing various information, for

example on previous connection and time comparisons, depending on the status of

recorder.

If a previous CCT file exists and the recorder was in sleep or slumber mode, a PC vs.

recorder clock comparison is calculated, indicating difference in seconds and ppm.

If the recorder was in measurement mode, then a drift calculation is performed, based

upon PC-

The RIT file contains partly the same information as the CCD file.

Upon retrieving date from a recorder and converting the data, the last measurement

retrieved time and the next scheduled measurement time is compared to the PC time.

The results are added to the CCD file and the MIT file.

Note: If the retrieved number of data does not match the last measured number of

data, erroneous results are to be expected.

Logger type

Battery life. Place

the mouse here to

see the remaining

battery life in %

Amount of

memory used

Recorder Mode

Status of Recorder

Serial number

Program and

start recorder

Retrieve

Recorder Data

Disconnect Recorder

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Содержание Starmon Mini




























































































Результаты поиска

Содержание Starmon Mini

Отзывы:

Похожие инструкции для Starmon Mini

Бренды по названию

Популярные бренды

Star-Oddi Starmon Mini, Руководство пользователя

Результаты поиска

Содержание Starmon Mini

Отзывы:

Похожие инструкции для Starmon Mini

Бренды по названию

Популярные бренды