Installing the wall bracket (Model 25222)
TABS
®
monitors should be mounted on a surface that is smooth and
flat. The TABS
®
wall bracket can be mounted with screws or with Dual
Lock
®
fastener. Choose the method that is appropriate for your
particular environment. See
"A word about Dual Lock
®
fastener."
Mounting the bracket with screws:
You will need:
• level
• pencil
• drill with
3
/
16
" bit
• hammer
• Phillips screwdriver
1.
Use the level to position the bracket straight on the mounting
surface. Be sure to leave enough room above the bracket for
removal of the monitor.
2.
Use the bracket as a template and pencil in the screw hole
positions.
3.
Drill the anchor holes with a
3
/
16
" bit.
4.
Hammer in the plastic wall anchors until they are flush with the
mounting surface.
5.
Align the holes in the bracket to the holes you have drilled and
attach the bracket using four of the 4 x 1" screws.
6
