14
Voice alarm
Your TABS
®
monitor (Figure 12) has audio recording capability. You
can record a message up to 10 seconds in length.
To record a voice message:
1. Remove the battery cover.
2. Push down the black
RECORD
button and hold it down until you
are finished recording. The light will be on during this time
indicating the monitor is recording (Figure 12).
3. Hold the monitor 8" - 12" from your mouth and record your
message. Speak slowly and enunciate your words.
4. Replace the battery cover.
5. When you have finished recording, review your message by applying
pressure (for 3 seconds) to, then releasing pressure from the TABS
®
pad in the manner in which you will use it with your patient or
resident. Your message should be easily understood and heard. If it is
not, re-record by following Steps 1 through 3.
Note: By rapidly removing and re-applying pressure to chair or bed
pads while connected to the TABS
®
mobility monitors model #25222
or 25223, may cause the monitor to bypass the voice alert and go
directly to sounding the audible alarm.
Figure 12
Battery compartment
Light
Microphone
Rocker switches
Black
record
button
