20
Testing the system
Test the TABS
®
monitoring system before each use and inspect the
pressure pads and TABS
®
monitor regularly to make sure they are not
damaged. Test the pressure pads by pressing firmly on the pressure pad
for 3 seconds. When you remove the pressure, the alarm will sound.
Reset the alarm using the reset button on the monitor or by positioning
the patient back on the pad.
Maintaining the TABS
®
mobility monitor
• Clean soiled areas on the monitor and bracket with a damp rag and
mild detergent. .
• The Dual Lock
®
fastener may be cleaned with most standard medical
virucidal disinfectant. Spray the disinfectant on the Dual Lock
®
fastener and allow it to dry thoroughly. If necessary, a toothbrush
may be used to gently scrub the "mushrooms."
• Inspect your TABS
®
monitor and all components including Dual
Lock
®
fastener and the wall bracket regularly. If there are any signs
of wear or damage, replace the component immediately. Call your
TABS
®
Representative at 800-824-2996 if you do not already have
replacement parts on hand.
• Replace the battery as soon as the low battery alert sounds.
Cleaning the pressure pad
• Clean soiled areas of cord and pressure pad with a clean cloth and
water or a vinyl-tolerant solution.
•
Do not immerse pressure pad in liquid of any kind.
