Inserting and removing the monitor
After the bracket has been mounted and your alarm options have been
set, insert your TABS
®
monitor into the bracket.
1. Slide the monitor into the bracket. The rails on the back of the
monitor fit into the slots on the plate. When you slide the two
together, you will hear a "click" when it is properly locked into place.
The front of the bracket should face the resident.
2. Check to make sure the monitor is securely in place by pulling it
gently upward.
To remove the monitor
1. Gently press the release lever on the bottom of the wall bracket with
one hand toward the mounting surface.
2. While pushing the release lever with one hand, slide the monitor up
out of the wall bracket.
Deterring removal of the TABS
®
monitor from the bracket
In the event the TABS
®
monitor is removed from the slide lock bracket
or tampered with by residents or other non-authorized persons, you may
wish to make it more difficult to remove the TABS
®
monitor from the
bracket. This can be accomplished by breaking off the lower portion of
the release tab. Once the release tab has been removed, a pen or
similarly shaped object carried by staff will need to be inserted into the
release catch before you can slide the TABS
®
monitor out of the bracket.
1.
If the bracket has already been installed, remove it from the wall.
2.
Firmly hold the upper portion of the release tab with one hand.
3.
The release tab is scored with a mark (Figure 4). Carefully
position pliers along the lower side of the score mark.
4.
Bend the tab backward until it breaks off (Figure 5).
8
Figure 4
Figure 5
Score Mark
Pliers
