Stanley SRP 2240 Скачать руководство пользователя страница 5

Страница: 5 / 28

SRP 2240 / 3860

User

Manual ◄ 5

FOREWORD

PLEASE ENTER (DATA ON MACHINE TYPE PLATE)

1. MACH.-TYPE:

2. MACH.-NO.:

3. ENGINE-TYPE:

4. ENGINE-NO.:

Stanley Hydraulic Tools

3810 SE Naef Rd

Milwaukie, OR 97267

Ph: 503-659-5660

Fax: 503-652-1780

www.stanleyhydraulics.com

These instructions include:

• Safety regulations

• Operating instructions

• Maintenance instructions

These instructions have been prepared for operation on the

construction site and for the maintenance engineer.

These instructions are intended to simplify operation of

the machine and to avoid malfunctions through improper

operation. Observing the maintenance instructions will

increase the reliability and service life of the machine when

used on the construction site and reduce repair costs and

downtimes.

Always keep these instructions at the place of use of the

machine.

Only operate the machine as instructed and follow these

instructions.

Also observe the corresponding rules and regulations valid

in your country. Always comply with the safety provisions in

your county and state.

Stanley is not liable for the function of the machine when

used in an improper manner and for other than the intend-

ed purpose.

Operating errors, improper maintenance and the use of in-

correct operating materials are not covered by the warranty.

The above information does not extend the warranty and

liability conditions of business of Stanley.

We reserve us the right to make changes due to technical

development without announcement.

Содержание SRP 2240





























Результаты поиска

Содержание SRP 2240

Отзывы:

Похожие инструкции для SRP 2240

Бренды по названию

Популярные бренды

Stanley SRP 2240, Руководство пользователя

Результаты поиска

Содержание SRP 2240

Отзывы:

Похожие инструкции для SRP 2240

Бренды по названию

Популярные бренды