Stanley RD60, Руководство оператора

Страница: 20 / 40

5. Push the battery release button on the battery pack to remove the battery from the charger.
NOTE
The charger and battery pack may become warm to the touch during charging. This normal
and does not indicate a problem.
6. Unplug the charger when battery charging is complete.
7. Store charger as described in “Storage” on page 28.
STORE DRILL BIT FOR TRANSPORTATION TO JOBSITE
WARNING!
DRILL BITS ARE VERY SHARP
Do not touch without proper Personal Protective Equipment (PPE).
SERIOUS CUTS AND ABRASIONS CAN OCCUR
1. Unscrew the drill bit container and insert the drill bit with the ejection pin. Use only 0.75 Inch to
1.5 Inch annular style bits.
2. Insert a drill bit container into the drill bit storage channel.
CAUTION!
DO NOT TRANSPORT TOOL WITH DRILL BIT INSTALLED
Store drill bit in the drill bit storage channel.
PERSONAL INJURY OR DAMAGE TO THE BIT CAN OCCUR.
20
Installation