Stanley RD60, Руководство оператора

Страница: 28 / 40

STORAGE
WARNING!
DISCONNECT BATTERY
Do not install, change tool accessories, clean or perform maintenance on the tool while
the battery is connected to the tool. Remove the battery from the tool before performing
maintenance.
ACCIDENTAL ENGAGEMENT OF THE TOOL CAN CAUSE SERIOUS INJURY.
⊲ Remove the battery and store the tool and battery in a clean, dry space, away from direct sun-
light and excess heat or cold.
⊲ Store batteries and charger away from foreign materials of a conductive nature such as, but not
limited to, dust, metal chips, steel wool, aluminum foil, or any buildup of metallic particles.
⊲ Do not freeze or immerse the batteries or charger in water or any liquid.
⊲ Clean the outside surfaces of the tool with a damp cloth. Remove all metal dust and debris.
Store the tool in a clean and dry space, away from direct sunlight and excess heat or cold.
⊲ Store the tool horizontally.
REMOVAL FROM STORAGE
⊲ Inspect tool for damage. If found, have the tool repaired by an authorized D
E
WALT service
center before use.
⊲ Fully charge the tool battery.
⊲ Inspect all the tool safety labels. Replace if they are damaged or not legible. Contact your
STANLEY dealer for replacements.
TRANSPORTING
WARNING!
FIRE HAZARD
Do not store or carry the battery pack so that metal objects can contact exposed battery
terminals. For example, do not place the battery pack in aprons, pockets, tool boxes,
product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
⊲ Follow all local government regulations that may apply along with recommended tie down
points and any equipment safety precautions at the front of this handbook when transporting
28
Operation