Installation
1. Place the holster against the wall and, using the screws provided,
attach the power supply holster to the wall.
2. Insert the power supply into the holster.
3. Connect the DC Plug-In Cable and wire tie it to the holster.
4. Connect the AC Line Cord and wire tie it to the side of the holster
opposite the DC Plug-In Cable.
24V Power Supply
Model SPS2466
Power
LED
Mount
Screws
Specifications subject to change without notice.
© 2012 Bogen Communications, Inc.
54-2211-01C 1301
NOTE: Current draws of less than
300mA may cause a low level
audible noise on the DC output.
SPS2466Manual_Layout 1 1/16/13 1:54 PM Page 1
