Stanley RD60, Руководство оператора

Страница: 21 / 40

INTENDED USE
This tool has been designed and built to drill railroad rail. Use in any other way is considered contrary
to the intended use. Compliance with and strict adherence to operation, service and repair conditions
as specified by the manufacturer, are also essential elements of the intended use.
WARNING!
DISCONNECT BATTERY
Do not install, change tool accessories, clean or perform maintenance on the tool while
the battery is connected to the tool. Remove the battery from the tool before performing
maintenance.
ACCIDENTAL ENGAGEMENT OF THE TOOL CAN CAUSE SERIOUS INJURY.
1. Ensure the battery is not connected to the tool.
2. Grab the carrying handle with your dominant hand.
3. Lift the tool and move it to the jobsite.
INSTALL RAIL TEMPLATE
NOTE
Use only rail templates and rail guides that are recommended by STANLEY. See
“Accessories” on page 34 for a list of compatible rail templates and guides. When
possible, use the RD60 templates listed.
1. Unscrew the template knobs on the side of the drill head.
2. Place the rail template so the dowel pins are inserted into the template.
3. Screw in the template knobs to secure the rail template to the tool.
62211 | February 2022 | 21
Operation