Stanley QEL 200, Руководство пользователя

Страница: 17 / 137

Standalone System
21
Add/Remove User(s)
Programing Mode
1
Inserts key, unlocks the lock, then re-locks the lock and unlocks it a second time (do this
within a five-second window of time).
2
A visual cue for “Enter Programming Mode” will occur, along with an audio cue .
Programming Time Out
1
After putting lock in “Programming Mode,” if there is no proximity card interaction for 10
seconds, the activity will time out.
2
A “Leave Programming Mode” visual cue will occur, along with an audio cue.
3
Lock will return to normal operating mode.
Add User
1
While in “Programming Mode,” present the proximity card (do not present card a second
time within two seconds).
2
The card data will be added to the ACL as a normal operator.
3
A visual cue for “Card Added to Stand-Alone ACL” will occur, along with an audio cue .
4
Programming mode counter will reset to 10 seconds.
Remove User
1
While in “Programming Mode,” present the proximity card twice in rapid succession.
2
The card data will be removed from the ACL.
3
A visual cue for “Card Removed from Stand-Alone ACL” will occur, along with an audio
cue.
4
Programming mode counter will reset to 10 seconds.
Battery Functionality
Replace Battery
1
Open front panel and remove battery pack.
2
Insert new battery pack.
3
If battery power level is sufficient, lock will automatically power up and resume normal
functionality.
4
If installation is successful, any “Low Battery Mode” visual or audio cues will cease.