7
The safety tag (p/n
15875) at right is attached
to the tool when shipped
from the factory. Read
and understand the safety
instructions listed on this
tag before removal. We
suggest you retain this tag
and attach it to the tool
when not in use.
TOOL STICKERS & TAGS
D A N G E R
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
1. FAILURE TO USE HYDRAULIC HOSE
LABELED AND CERTIFIED
AS NON-CONDUCTIVE
WHEN USING HYDRAULIC TOOLS
ON OR NEAR ELECTRICAL LINES MAY RESULT IN DEATH
OR SERIOUS INJURY.
BEFORE USING HOSE
LABELED AND CERTIFIED AS NON-
CONDUCTIVE
ON OR NEAR ELECTRIC LINES BE SURE THE
HOSE IS
MAINTAINED AS NON-CONDUCTIVE
. THE HOSE
SHOULD BE REGULARLY TESTED FOR ELECTRIC CURRENT
LEAKAGE IN ACCORDANCE WITH YOUR SAFETY DEPART-
MENT INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJECTION
INTO THE BODY OR CAUSE OTHER SEVERE PERSONAL
INJURY.
A
DO NOT
EXCEED SPECIFIED FLOW AND PRESSURE FOR
THIS TOOL. EXCESS FLOW OR PRESSURE MAY CAUSE A
LEAK
OR
BURST.
B
DO
NOT
EXCEED RATED WORKING PRESSURE OF HY-
DRAU
LIC HOSE USED WITH THIS
TOOL. EXCESS PRESSURE MAY
CAUSE A LEAK OR BURST.
C CHECK TOOL HOSE COUPLERS AND CONNECTORS DAILY
FOR
LEAKS.
DO NOT
FEEL FOR LEAKS WITH YOUR
HANDS.
CONTACT WITH A LEAK MAY
RESULT IN SEVERE PERSONAL
INJURY.
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
D DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO
NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR
DAMAGED HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROPERLY CONNECTED
TO THE TOOL BEFORE PRESSURING SYSTEM. SYSTEM
PRESSURE HOSE MUST ALWAYS BE CONNECTED TO TOOL
“IN” PORT. SYSTEM RETURN HOSE MUST ALWAYS BE
CONNECTED TO TOOL “OUT” PORT. REVERSING CONNEC-
TIONS MAY CAUSE REVERSE TOOL OPERATION WHICH CAN
RESULT IN SEVERE PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-CEN-
TER HYDRAULIC SYSTEMS. THIS MAY RESULT IN LOSS OF
OTHER HYDRAULIC FUNCTIONS POWERED BY THE SAME
SYSTEM AND/OR SEVERE PERSONAL INJURY.
5. BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP
BYSTANDERS CLEAR OF YOUR WORK AREA.
6. WEAR HEARING, EYE, FOOT, HAND AND HEAD PROTEC-
TION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL
TOOL REPAIR MAINTENANCE AND SERVICE MUST ONLY BE
PERFORMED BY AUTHORIZED AND PROPERLY TRAINED
PERSONNEL.
(shown smaller then actual size)
SAFETY TAG P/N 15875
D A N G E R
NOTE
THE INFORMATION LISTED ON
THE STICKERS SHOWN, MUST BE
LEGIBLE AT ALL TIMES.
REPLACE DECALS IF THEY
BECOME WORN OR DAMAGED.
REPLACEMENTS ARE AVAILABLE
FROM YOUR LOCAL STANLEY
DISTRIBUTOR.
15-34 LPM/4-9 GPM
DO NOT EXCEED 140 BAR/2000 PSI
DO NOT EXCEED SPECIFIED FLOW OR PRESSURE. USE
CLOSED-CENTER TOOL ON CLOSED-CENTER SYSTEM.
USE OPEN-CENTER TOOL ON OPEN-CENTER SYSTEM.
CORRECTLY CONNECT HOSES TO TOOL "IN" AND "OUT"
PORTS. IMPROPER HANDLING, USE OR MAINTENANCE OF
TOOL COULD RESULT IN A LEAK, BURST OR OTHER
TOOL FAILURE. CONTACT AT A LEAK OR BURST CAN
CAUSE OIL INJECTION INTO THE BODY. FAILURE TO
OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY.
Model No.:
HD08
CAUTION
Staney Hydraulic Tools
3810 SE Naef Road
Miwaukie, OR 97267
17160
Electrical Danger Decal
17161
HD08 Name Tag/GPM Decal
11354
OC/CC Decal
ELECTROCUTION
HAZARD
Failure to use hydraulic hose labeled and
certified as non-conductive when using
hydraulic tools on or near electric lines
may result in death or serious injury.
For proper and safe operation read
owners manual and make sure that you
have been properly trained in correct
procedures required for work on or
around electric lines.
Stanley Hydraulic Tools
3810 SE Naef Road
Milwaukie, OR 97267
17179
Stanley Decal
17162
OC/CC Decal
C
C
C
28323
CE Decal
28788
Manual Decal
_______
22796
Sound Power
Level Decal
D
30 LPM @ 138 B AR
EHTMA CATEGORY
11207
Circuit D Decal
11206
Circuit C Decal
105
Lwa
Содержание HD08
Страница 2: ...2...
