17
SPECIFICATIONS
Rotation Speed at 6 gpm ....................................................................................................................... 1175 rpm
Blows per Minute at 6 gpm .................................................................................................................4500 blows
Weight ..............................................................................................................................................6 lbs / 2.7 kg
Length .......................................................................................................................................... 13.8 in. / 35 cm
Height ............................................................................................................................................ 5.5 in. / 14 cm
Pressure ...................................................................................................................... 750-2000 psi / 50-114 bar
Flow Range ..........................................................................................................................3-9 gpm / 11-34 lpm
Optimum Flow ........................................................................................................................... 6 gpm / 22.8 lpm
Porting ..........................................................................................................................................-8 SAE O-Ring
Connect Size and Type ................................................................................................................-8 SAE O-Ring
Motor ........................................................................................................................................................ Integral
Bit Type ..................................................................................................................................................SDS Plus
SERVICE PARTS
Part Number Description
17183 ...............................................................................................Service Kit, Includes Shaft Keeper and Knob
18142 ......................................................................................................................................................... Seal Kit
ACCESSORIES
Part Number Description
16769 ........................................................................ 1/2-inch Geared Chuck (requires chuck adapter p/n 16770)
16770 ..................................................................................... Chuck Adapter (used with geared chuck p/n 16769
Figure 2 illustrates the hammer drill accessories listed above.
SOUND POWER AND VIBRATION DECLARATION
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels
102 dBA
Uncertainty, Kwa, in decibels
3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels
94 dBA
Uncertainty, Kpa, in decibels
3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard ISO3744
NOTE- The sum of a measured noise emision value and its associated uncertainty
represents an upper boundry of the range of values which is likely to occur in
measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emmission value: a
10.3 m/sec²
Uncertainty: K
0.8 m/sec²
Values determined according to ISO 8662-3
Содержание HD08
Страница 2: ...2...
