Stanley FATMAX FMEG232, Оригинальное руководство пользователя

Страница: 10 / 108

10
ENGLISH (Original instructions)
Warning! Do NOT use the tool when the gear case is
unlocked.
Application on metals
residual-current device (RCD) is inserted to prevent danger
from metal chips.
If the RCD causes power disconnection, have the tool sent to
an authorized STANLEY FATMAX dealer for repair.
Warning! Under extreme working conditions, conductive
dust and grit may accumulate on the housing interior when
handling metal workpieces. This could create an electric shock
hazard as it weakens the protective insulation in the grinder.
To avoid accumulation of metal chips in the interior of the
grinder, we recommend cleaning the ventilation ducts daily.
Refer to Maintenance.
Using grinding wheels
Warning! Metal powder accumulates. Excessive use of the
grinding wheel on metals may increase the risk of electric
shock.
To reduce the risk, insert the RCD before use and clean the
ventilation ducts daily. Follow the maintenance instructions
below to blow dry compressed air into the ventilation ducts.
Maintenance
Your STANLEY FATMAX corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
u
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
plug.
u
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
FMEG232 (Type 1)
Input voltage V
ac
230
Power input
W 2000
Rated speed min
-1
6500
Disc diameter mm
230
Disc bore mm
22
Max disc thickness
grinding discs mm
6
cutting discs mm
3.5
Spindle size
M14
Weight kg 5
L
pA
(sound pressure) 94 dB(A), Uncertainty (K) 3 dB(A)
L
WA
(accoustic power) 105 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Surface grinding (a
h,SG
) 7.8 m/s
2
, uncertainty (K) 1.5 m/s
2