Set-Reset Latch
The
set-reset latch
facility is available on Lock 1 only. It allows the lock relay to be set
when a valid key is presented, and reset when a valid key is presented again. This allows the
reader to be used like a toggle to operate another system.
Note:
When this facility is used, the Request to Exit facility for Door 1 will no longer be
available.
Setting Up the Set-Reset Latch Facility
1. Present an Editor Key:
Editor
Key
:
0
1:Y
2:Y
2. Press the Left button:
Lock1
Time
:
3
Fail
‐
Safe
3. Press the Middle button to select Set-Reset Latch:
Lock1
Time
:
‐‐
Set
‐
Reset
Latch
4. Present the Editor Key again:
Lock1
Time
Saved
37
