Standex BCHX0050B, Руководство по установке и эксплуатации, Страница: 15 / 45

5/16 Rev. B 57-02497 15
●
Connect correctly rated over current protection device in the service line to the service line J-
box on the condensing unit.
●
After routing condensate line from drain pan of evaporator coil, seal around all refrigeration,
electrical and drain lines with silicone or butyl caulking.
● Start compressor and allow to run at least 24 hours before placing product into the walk-in.
During the testing period you should:
●
Check the temperature holding range against the control setting.
●
On low temperature units, check the defrost control system to see that all ice is removed from
the coil during each defrosts cycle.
●
Perform checks of door operation and all other component operations.
These particular systems are pre-charged at the factory with proper refrigerant, but should be
operationally checked as per page 11, A.6 and A.7.