ASSEMBLY INSTRUCTIONS
7
STEP 1
Refer to illustration below.
Unfold the
REAR FRAME(2)
away from the
MAIN FRAME(1).
Lock the frame
assembly in unfolded position by inserting the
SECURE PIN(71)
into the upper hole in the
MAIN FRAME(1).
STEP 2
Attach the
REAR STABILIZER(11),
the one with
WHEELS(39),
to the
REAR FRAME(2)
with the wheels
facing backward. Secure with
CARRIAGE BOLTS(M8x1.25x65mm)(79), ACORN NUTS(M8x1.25)(80),
and
ARC WASHERS(M8)(78).
STEP 3
Attach the
FRONT STABILIZER(4)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x65mm)
(79), ACORN NUTS(M8x1.25)(80),
and
ARC WASHERS(M8)(78).
Insert the pin into
the upper hole to lock the
frames in unfolded position.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [email protected], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
Содержание 15-0301
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Страница 22: ...NOTES 22 ...