Stairville MATRIXX FX-440 DMX, Руководство пользователя

Страница: 9 / 16

9
4. How To Control The Fixture
You can operate the unit in two ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By DMX controller
No need to turn the unit off when you change the DMX address, as new
DMX address setting will be effected at once. Every time you turn the unit
on, it will show “7871” on the display. After that the unit will be ready to
receive DMX signal or run the built-in programs.
4.1 Master/Slave pre-prog. Function
By linking the units in master/slave connection, the first unit will control the
other units to give an automatic, sound activated, synchronized light show.
This function is good when you want an instant show. You have to set the
first unit in master mode and select (random show), (show
1) or … or (show 12) and speed. Its DMX input jack will have noth-
ing plugged into it, and Its master LED will be constantly on and sound
LED will flash to the music. The other units will have to select (nor-
mal) or (2 light show) mode, Their DMX cables plugged into the
DMX input jacks (daisy chain) and the slave LED lights will constantly on.
2-light show
In slave mode, means the unit works as the master unit and
means 2-light show. In order to create a great light show, you can
set on the second unit to get contrast movement to each other,
even if you have two units only.
4.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. There is a ter-
minator for connecting the easy controller inside the fixture. By connecting
the cable into DMX IN waterproof cable entry gland to the CA-8 terminator
of the first fixture, you will find that the remote control on the first fixture
will control all the other fixtures for Stand by, Function and Mode functions.
Blackout Blackout the unit
Function 1. Sound white strobe
2. Sound colour strobe
Select Show
(Show 1-12)
Mode Sound/Strobe
(LED OFF)
Show
(LED ON)