Stairville MATRIXX FX-440 DMX, Руководство пользователя

Страница: 3 / 16

3
1. Safety Instruction
You have to carefully read the instruction, which includes impor-
tant information about the installation, usage and maintenance.
• Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that he also receives this instruction booklet.
• Unpack and check carefully there is no transportation damage before
using the unit.
• Before operating, ensure that the voltage and frequency of power sup-
ply match the power requirements of the unit as stated in this manual.
• It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.
• The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or fire.
• The unit must be installed in a location with adequate ventilation, at
least 50 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• Disconnect the device from the mains power before any servicing or
maintenance.
• Maximum ambient temperature is TA: 40°C. Don’t operate it where the
temperature is higher than this.
• In the event of serious operating problem, stop using the unit imme-
diately. Never try to repair the unit by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance centre. Always use the same
type spare parts.
• Do not connect the device to any dimmer pack.
• Do not look directly at the LED light beam while the fixture is on.
• There are no user serviceable parts inside the fixture. Do not open the
housing or attempt any repairs by yourself. If the fixture shows any vis -
ible damage or in the unlikely event, that your fixture may require serv -
ice, please contact your nearest dealer.
• Due to the magnifying type lens, please keep the lens out of contact
with direct sunlight. Direct sunlight can cause heat to build up inside of
the unit, which will seriously damage the device.
• Don’t connect more that 20 units to one AC mains power supply lead.
Otherwise it could be overloaded and break down.