Stairville MATRIXX FX-440 DMX, Руководство пользователя

Страница: 10 / 16

10
4.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX
address from 1 to 512 channel so that the units can receive the DMX
signal.
Press the
MENU button up to when the is shown on the display.
Press the ENTER button and the display will blink. Use the DOWN / UP
button to change the DMX512 address.
Once the address has been selected, press and keep the
ENTER button
pressed up to when the display stops blinking or storing automatically 8
seconds later. To go back to the functions without any change press the
MENU button again. If you use this function please refer to the following
diagram to address your DMX512 channel for the first 4 units.
4 channels:
144 channels:
5. DMX 512 Configuration
4 CH mode: