manualshive.com logo in svg

Stairville LC-48, Руководство пользователя

Поделиться
Скачать
Stairville LC-48 Скачать руководство пользователя страница 4

STAIRVILLE • LIGHT OPERATOR • LC-48

4

 

www.thomann.de

 

X

Never leave the device unattended during operation.

 

X

Notice regarding disconnection from mains-power: 

To completely disconnect the device from mains power, you must 

disconnect the adaptor from the power socket. For this reason the 

device should be placed in a position where unobstructed access to the 

power socket is assured at all times, so that in an emergency you will 

be able to immediately pull out the adaptor. To eliminate the risk of fire 

you should completely disconnect the adaptor from the power socket 

when the device is not going to be used for a long time, for example, 

during holidays.

 

X

Always grasp the power adaptor itself. Do not pull on the cord and 

never touch the power adaptor with wet hands as this could result in a 

short circuit or an electrical shock. Do not place the device, speakers 

or anything else on the adaptor cord and make sure that it does not 

become clamped. Never tie knots in the adaptor cord and do not bind 

it together with other cables. Lay the adaptor cord so that no one can 

step on or stumble over it. A damaged power adaptor can cause a 

fire or an electrical shock. Check the power adaptor and its cord from 

time to time. Should it become damaged contact our customer service 

department to have it replaced.

 

X

Before a storm and/or a thunderstorm with a risk of lightning, please 

disconnect the device from the electrical power source.

Features

 

X

Digital Technology Adopted.

As a stage light controller, the unit can control intelligent unit and 

ordinary light.

 

X

Power Failure Memory. 

Automatically recover to the last condition when you turn on the 

machine.

 

X

Standard MIDI and DMX ports.

Conveniently connect with other units and machines.

 

X

Powerful Program Edit.

You could edit different program according to your needs. The program 

could contain 4600 steps utmost and 96 programs could be stored.

 

X

Various Running Type.

You can run the SCENE with Audio, Speed Slider, Standard beat etc.

 

X

More programs can run synchronously.

You can run more programs in Single Mode or Mix Mode simultaneously.

Содержание LC-48





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды