manualshive.com logo in svg

Stairville LC-48, Руководство пользователя

Поделиться
Скачать
Stairville LC-48 Скачать руководство пользователя страница 23

STAIRVILLE • LIGHT OPERATOR • LC-48

www.thomann.de

23

Receiving MIDI File Dump

   Tap the Flash button 3 three times 

while holding down the Record button, 

the LCD Display reads “IN” indicating 

the controller is ready to receive MIDI 

file dump.

Sending MIDI File Dump

   Tap the Flash button 4 three times 

while holding down the Record button, 

the LCD Display reads “OUT” indicating 

the controller is ready to send a file.

NOTE:

1. During file dump, all other operations will not function. Functions will 

automatically return when the file dump is completed.

2. File dump will be interrupted and stop if errors occur or power failure.

Implementation

1. During receiving and sending MIDI data, all MIDI scenes and channels 

being run will automatically paused if there is no response within 10 

minutes.

2. During receiving and sending file dump, the controller will 

automatically search for or send Device ID of 55H(85), a file named 

DC2448 with an extension of “BIN(SPACE)”.

3. File dump allows this controller to send its MIDI data to next unit or 

other MIDI devices.

4. There are two types of file dump mode described as below:

Tap this button three times

Tap this button three times

Содержание LC-48





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды