manualshive.com logo in svg

Stairville LC-48, Руководство пользователя

Поделиться
Скачать
Stairville LC-48 Скачать руководство пользователя страница 3

STAIRVILLE • LIGHT OPERATOR • LC-48

www.thomann.de

3

Safety instruction

You have to carefully read the instruction, which includes important 

information about the installation, usage and maintenance.

 

X

Unpack and check carefully there is no transportation damage before 

using the unit.

 

X

Before operating, ensure that the voltage and frequency of power supply 

match the power requirements of the unit as stated in this manual.

 

X

Never sever the power cord’s earth wire of any device. Otherwise a 

LIFE THREATENING 

situation exists!

 

X

The unit must be installed in a location with adequate ventilation. Be 

sure that no ventilation slots are blocked during operation.

 

X

The unit is for indoor use only. Use it only in a dry location. Exposing the 

device to rain or moisture would cause the risk of electrical shock or fire.

 

X

Disconnect the device from the mains power before any servicing or 

maintenance.

 

X

DO NOT let any liquids or objects enter the unit. Should any liquid 

be spilled on the unit, DISCONNECT the power supply to the unit 

immediately and contact the service company.

 

X

Keep any flammable material away from the unit while it is operating. 

Otherwise you run the risk of causing a fire.

 

X

In the event of serious operating problems, stop using the unit 

immediately. Never try to dismantle, repair or modify the unit by 

yourself. Otherwise warranty becomes void. Repairs carried out by 

unskilled people can lead to damage or malfunction. Please contact the 

nearest authorized technical assistance centre. Always use the same 

type spare parts.

 

X

Under no circumstances may you open the device housing. Should you 

do so your safety would not be assured and the warranty will become 

void. There are no operational components whatsoever inside!

 

X

This unit must only be operated by adults. Never allow children to 

tamper or play with it. Packaging material (plastic bags, polystyrene 

foam, nails, etc.) MUST NOT be left within children’s reach, as it can be 

dangerous.

 

X

NEVER use the unit under the following conditions: 

> In places subject to vibrations or bumps. 

> In places with a temperature of over 45°C/113°F or less than 2°C/ 35.6°F. 

> In places subject to excessive dryness or humidity (ideal conditions 

are between 35% and 80%).

Содержание LC-48





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды