Stairville LC-48, Руководство пользователя

Страница: 10 / 28

STAIRVILLE • LIGHT OPERATOR • LC-48
10
www.thomann.de
IMPORTANT!!!
Always remember to exit Record mode when you won’t continue
your programming, otherwise you may lose control of your unit.
NOTE:
The second time you enter your new Record Code different from that of
the first time, the LEDs will not flash, which means you‘ve failed to change
the Record Code.
When you‘ve entered a new Record Code the first time, and now you want
to cancel the new Record Code, you may press and hold down the Record
and Exit buttons at a time to exit.
Program Scenes
1. Record Enable.
2. Select the 1-48 Single mode by tapping
Mode Select button. This will give
you control of all 48 channels as you
program.
Be sure that Master A & B are both
set at maximum. (Master A is at its
maximum in the fully up position , while
Master B is at its maximum in the fully
down position.)
3. Create a desired scene using Channel
Sliders 1-24. At 0% or DMX 0, these
sliders should be at position 0, and
at 100% or DMX 255, these sliders
should be at position 10.