22
4-5 Running Scenes
4-5.1 Manual Mode
1. When the power is turned on, this unit enters Manual mode automatically. This function allows you to run a
bank of programmed scenes in a sequential loop.
2. Make sure Auto and Music LEDs are both off.
3. Use the Bank Up/Down button to select the bank that contains the scenes you wish to run.
4. Tap the Scene button to select the scene to run.
4-5.2 Auto Mode
This function allows you to run a bank of programmed scenes in a sequential loop.
1. Tap the Auto/Del button to activate Auto mode. The Auto LED lights
indicating Auto mode is active.
2. Use the Bank Up/Down button to select a bank of scenes to run.
3. After selecting the bank of scenes you wish to run, you can use the Wait
Time slider(or Tap Sync/Display button) and Fade Time slider to adjust the
scenes to your desired effect.
Hints:
The Tap Sync button is used to set the speed by tapping the button several times, the last two taps will define
the speed with a maximum of 5 minutes. Tap Sync will override any previous setting of the Wait Time slider
unless the slider is moved again.
