Stairville BSW-100 LED BeamSpotWash, Руководство пользователя, Страница: 26 / 44

1.
Press [MENU] .
2.
Press and hold [ENTER] for about 3 seconds.
ð
The settings menu opens up.
3.
Use [UP] and [DOWN] to navigate to menu item ‘Prism’ .
4.
Confirm your selection with [ENTER] .
5.
Use [UP] and [DOWN] to select a value between –128 and 127.
6.
Confirm your selection with [ENTER] .
ð
The settings are saved and immediately effective.
7.
To exit the settings menu, press [MENU] or wait for 30 seconds.
1.
Press [MENU] .
2.
Press and hold [ENTER] for about 3 seconds.
ð
The settings menu opens up.
3.
Use [UP] and [DOWN] to navigate to menu item ‘R-Prism’ .
4.
Confirm your selection with [ENTER] .
5.
Use [UP] and [DOWN] to select a value between –128 and 127.
6.
Confirm your selection with [ENTER] .
ð
The settings are saved and immediately effective.
7. To exit the settings menu, press [MENU] or wait for 30 seconds.
1.
Press [MENU] .
2.
Press and hold [ENTER] for about 3 seconds.
ð
The settings menu opens up.
3.
Use [UP] and [DOWN] to navigate to menu item ‘Angle/Frost’ .
4.
Confirm your selection with [ENTER] .
5.
Use [UP] and [DOWN] to select a value between –128 and 127.
6.
Confirm your selection with [ENTER] .
ð
The settings are saved and immediately effective.
7. To exit the settings menu, press [MENU] or wait for 30 seconds.
Setting zero position prism
Setting zero position R prism (R prism
adjustment)
Setting zero position for angle / frost
(angle/frost adjustment)
Operating
moving head
26