Stairville BSW-100 LED BeamSpotWash, Руководство пользователя, Страница: 15 / 44

7 Operating
7.1 Starting the device
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
Connect the device to the power supply to start operation. After a few seconds, the
fans start to work, the head moves to the home positions for rotation (pan) and incli-
nation (tilt). After a few more seconds, the unit will perform the last automatic show.
The name of the set show appears on the display, e.g., ‘Show 1’ . When the unit is
operated in master mode, the ‘MASTER’ status LED is lit. The device is now opera-
tional.
7.2 Main menu
1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to browse between the various menu items. To leave the
menu, press [MENU] again.
3. If no button is pressed for about 30 s., the menu will be exited automatically.
ð
All previous settings are retained even when the device is switched off and
disconnected from the mains.
4.
To restart with default values, use the functions under ‘Reset Functions’ in the
main menu.
1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘DMX Functions’ .
3.
To open the ‘DMX Functions’ menu, press [ENTER] .
4.
Use [UP] and [DOWN] to select the submenu ‘DMX Address’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to select a DMX address between 1 and 512.
To use the main menu:
Setting the DMX address
Operating
BSW-100 LED BeamSpotWash
15