Stairville BSW-100 LED BeamSpotWash, Руководство пользователя, Страница: 18 / 44

1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘Fixture Setting’ .
3.
To open the ‘Fixture Setting’ menu, press [ENTER]
4.
Use [UP] and [DOWN] to select the submenu ‘Dimmer Curve’ .
5.
Confirm your selection with [ENTER]
6.
Use [UP] and [DOWN] to choose between
n
‘Linear’ : The light intensity increases linearly with the DMX value.
n
‘Square Low’ : The light intensity is finer in the lower range, and can be
adjusted in the upper range.
n ‘Inv.SQ Law’ : The light intensity is coarser in the lower range, and can be
adjusted in the upper range.
n
‘S Curve’ : The light intensity is fine in the upper and lower range, and can
be adjusted in the mid range.
7.
Confirm your selection with [ENTER] .
ð
The desired setting is saved.
8.
To leave the menu, press [MENU] or wait for 30 seconds.
1. To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘Fixture Setting’ .
3.
To open the ‘Fixture Setting’ menu, press [ENTER] .
4.
Use [UP] and [DOWN] to select the submenu ‘Show Focus’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to choose between ‘5m’ , ‘10m’ or ‘15m’ .
7.
Confirm your selection with [ENTER] .
ð
The desired setting is saved.
8. To leave the menu, press [MENU] or wait for 30 seconds.
The unit has four automatic shows. After the first power-up without a DMX controller,
the first show is automatically performed. If you want to set another show, do the
following:
1.
To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘Show Setting’ .
3. To open the ‘Show Setting’ menu, press [ENTER] .
4. Use [UP] and [DOWN] to select the submenu ‘Show Mode’ .
5. Confirm your selection with [ENTER] .
6. Use [UP] and [DOWN] to select a show between 1 and 4.
Specify dimming mode
Specify Show Focus
Enabling operating mode ‘Auto
Show’.
Operating
moving head
18