Stairville BSW-100 LED BeamSpotWash, Руководство пользователя, Страница: 16 / 44

7.
Confirm your selection with [ENTER] .
ð
The desired address is saved.
8.
To leave the menu, press [MENU] or wait for 30 seconds.
Make sure that this number matches the configuration of your DMX controller. The
following table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
17 channels 496
20 channels 493
The unit can be controlled in 17 or 20-channel mode. To specify the desired mode,
proceed as follows:
1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘DMX Functions’ .
3.
To open the ‘DMX Functions’ menu, press [ENTER] .
4.
Use [UP] and [DOWN] to select the submenu ‘DMX Channel Mode’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to choose between ‘Mode 1 (17ch)’ and ‘Mode 2 (20ch)’ .
7.
Confirm your selection with [ENTER] .
ð
The desired mode is saved.
8.
To leave the menu, press [MENU] or wait for 30 seconds.
1. To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘DMX Functions’ .
3. To open the ‘DMX Functions’ menu, press [ENTER] .
4. Use [UP] and [DOWN] to select the submenu ‘DMX State’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to choose between ‘Master’ (master operation),
‘Blackout’ (lamp is turned off) or ‘Hold’ (the device continues to operate in the
current mode with the last active DMX values until the signal returns).
7. Confirm your selection with [ENTER] .
ð
The desired status is saved.
8. To leave the menu, press [MENU] or wait for 30 seconds.
Specify the DMX mode
Behaviour on DMX signal interrupt
Operating
moving head
16