Stairville BSW-100 LED BeamSpotWash, Руководство пользователя, Страница: 22 / 44

8.
To exit the ‘Manual Test’ submenu, press [MENU] .
All changes made in the ‘Manual Test’ submenu are undone after
exiting the submenu.
1. To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘ Fixture Information’ .
3. To open the ‘ Fixture Information’ menu, press [ENTER] .
ð
Next to ‘Fixture use time’ , the operating hours of the device are displayed.
4. Use [UP] and [DOWN] to select the submenu ‘Firmware Version’ .
5. Confirm your selection with [ENTER] .
ð
The version number of the firmware currently used in the device will
appear on the display.
6.
To leave the menu, press [MENU] or wait for 30 seconds.
1. To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘Reset Functions’ .
3. To open the ‘ Reset Functions’ menu, press [ENTER] .
ð
Here you can choose between the options ‘Pan/Tilt’ (resets the axis move-
ments), ‘Effect’ (resets the effects) or ‘All’ (resets all settings).
4.
Use [UP] and [DOWN] to select the desired sub menu.
5.
Confirm your selection with [ENTER] .
6.
If you want to reset the respective settings, select ‘Yes’ . If you do not want to
reset anything, select ‘No’ .
7. To leave the menu, press [MENU] or wait for 30 seconds.
The menu item ‘Special Functions’ gives you the option to restore the factory defaults
of the device.
1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘Special Functions’ .
3.
To open the ‘Spacial Functions’ menu, press [ENTER] .
4.
To open the ‘Factory Setting’ sub menu, press [ENTER] .
5.
If you want to reset the device to the factory defaults, select ‘Yes’ . If you do not
want to reset anything, select ‘No’ .
6. To leave the menu, press [MENU] or wait for 30 seconds.
Device information display
Resetting individual functions
Reset to factory defaults
Operating
moving head
22