General Information
Operating Instructions MT-xx6-A
R. STAHL HMI Systems GmbH / OI_MT_xx6_A_en_V_03_00_26.docx / 03.11.2020
Page 43 of 60
18.3.2.1
Recovery
If a Panel PC is reset to the factory state (recovered) it will remain
registered but will have to be reactivated !
This requires an active internet connection to a Microsoft server !
18.3.2.2
Company-specific Windows installations
The Windows 10 IoT license key is tied to STAHL images !
The installation of own Windows 10 IoT operating systems requires a
separate license key !
All necessary drivers are provided by R.STAHL HMI Systems GmbH.
Please contact our Support department.
18.3.3
Initial start-up
When the device is started for the first time, the Windows installation assistant starts where
users have to select certain settings.
Please follow the instructions of the installation assistant.
18.3.4
Recovery Stick
To restore your Panel PC device to its original state you will need a
Recovery Stick, which is available as an optional extra. This recovery
stick (USB-drive, also available intrinsically safe) contains the factory
image, with which the system can be restored to delivery status
within a very short time.
Please note that you can restore the HMI devices to their original
state only with the aid of the Recovery Stick
As an option, the recovery stick can also contain a backup software,
with which you can back up your own device configuration.
18.3.5
Back-up
Please note that it is the sole responsibility of the operator to
generate a back-up of the HMI devices and their overall function.
We strongly recommend such a back-up to be stored on an external
storage medium or on the company network.
NOTICE
NOTICE
NOTICE
NOTICE
