Operating Instructions MT-xx6-A
Material declaration
Page 40 of 60
R. STAHL HMI Systems GmbH / OI_MT_xx6_A_en_V_03_00_26.docx / 03.11.2020
All products of R. STAHL HMI Systems GmbH are produced in accordance with the applicable
regulations and comply with the substance restrictions given in these regulations. Due care is
taken to ensure that the prohibitions and restrictions concerning the use of substances are
observed throughout the entire value added chain. Exemptions are permitted only if, from a
scientific and technical point of view, substitution of the notifiable substance is not feasible.
These are solely exemptions that are limited to certain applications and materials, which are
explicitly approved in the directives. In that event, detailed information about the substances
that are concerned and the exemptions will be given in appendix 2.
Component Designation
Mass
(g)
Declarable Substance
Groups and Substances
(IEC 62474 database)
CAS Nr.
Mass %
Exemption
(acc. to
directive)
Label xx
All labels on
the product
based on
3M
Scotchcal
3698E
76500,
76510,
76530
1
8-Oxa-3,5-dithia-4-
stannatetradecanoic acid,
10-ethyl-4,4-dioctyl-7-
oxo-,
2-ethylhexyl ester
15571-58-1
> 0,1
-
8-Oxa-3,5-dithia-4-
stannatetradecanoic acid,
10-ethyl-4-[[2-[(2-
ethylhexyl)oxy]-2-
oxoethyl]thio]-4-octyl-7-
oxo-,
2-ethylhexyl ester
27107-89-7
-
17.1 RoHS directive 2011/65/EC
The revised version of the RoHS (restriction of hazardous substances) 2002/95/EC directive,
directive 2011/65/EC, extends its area of application to all electric and electronic products.
The HMI devices are conform with the requirements from RoHS directive 2011/65/EU, dated
03.01.2013.
17.1.1
China RoHS labelling
According to new Chinese legislation in force since 01.03.2007, all devices containing
hazardous substances must be labeled accordingly.
The part of all toxic or hazardous substance contained in the homogeneous materials of the
HMI devices is below the limit requirements in SJ/T11363-2006.
