Mounting and installation
16
243137 / 640260300020
2015-12-22·BA00·III·en·05
Linear Luminaire with LED
Series EXLUX 6402/2
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.3
Installation
7.3.1 Opening and Closing of the Enclosure
• Remove the closing cap of the central lock.
• Turn the central lock using a socket wrench M8, wrench size 13, by 90° to the left
as far as it will go.
• Swivel down the translucent cover.
• Proceed in reverse order to close.
• The seal of the translucent cover must lie correctly on the sealing edge.
• Push the closing cap onto the central lock opening (dust protection).
52 W
670 [26.38]
130 [5.12]
When mounting the luminaire using top rails, ensure that the mounting sur
-
face is flat. Otherwise, the enclosure might be mounted in a warped/twisted
way. The result is leakage of the luminaire and difficulties in replacing the
translucent cover.
For pipe clamp mounting, use the solution of R. STAHL Schaltgeräte GmbH
with integrated mounting rail providing reliable and stable four-point fixing!
In case of point suspension using pipe clamps, R. STAHL Schaltgeräte
GmbH does not guarantee the strength and tightness of the luminaire!
DANGER
Risk of electric shock!
Risk of fatal injuries!
• Luminaires without switch must not be opened when they are supplied
with power (see information plate on the lock)!
NOTICE
Danger due to electrostatic discharge.
Electronic components can be destroyed if touched.
• Do not touch the LED-PCBs!
Recommendation
Opening and closing of the luminaire by using a socket wrench from
R. STAHL Schaltgeräte GmbH.
15448E00
15451E00
15436E00
165°
170
90°
