Stahl EC-710 series, Руководство по эксплуатации

Страница: 10 / 28

Operating Instructions EC-710-xxx Safety Advice
Page 10 of 28

R. STAHL HMI Systems GmbH / OI_Camera_EC_710-xxx_en_V_02_00_11.docx / 08.09.2020
10 Safety Advice
This chapter is a summary of the key safety measures. The summary
is supplementary to existing rules which staff also have to study.
The safety of persons and equipment in hazardous areas depends on
compliance with all relevant safety regulations. Thus, the installation
and maintenance staff carry a particular responsibility, requiring
precise knowledge of the applicable regulations and conditions.
The notes listed below in section 10.1 and 10.2 must be heeded to
avoid injury and damage to equipment !
10.1 Installation and operation
Please note the following when installing and operating the device:

The national regulations for installation and assembly apply (e.g. EN 60079-14).

The EC-710-xxx colour cameras may be installed in zones 1 or 2 and 21 or 22.

The colour camera must only be operated when it is fully assembled.

As soon as the camera is visibly damaged it must no longer be operated !

National safety and accident prevention rules.

Generally accepted technical rules.

Safety instructions contained in these operating instructions.

Any damage may compromise the explosion protection.
Use the colour camera for its intended purpose only (see "Function").
Incorrect or unauthorized use and non-compliance with the instructions in this manual will void
any warranty on our part.
No changes may be made to the colour camera that compromise explosion protection !
The colour camera may only be installed and operated in an undamaged, dry and clean
condition !
10.2 Special conditions
10.2.1 Description

The type Exicom EC-710 cameras are intended for fixed installation and are fitted with a
fixed cable connection.

The ambient temperature ranges are:
-40 °C <+ 75 °C for T4 and T125°C
-40 °C <+ 50 °C for T5 and T100°C
-40 °C <+ 35 °C for T6 and T85°C
NOTICE
CAUTION